TOP RATED 5 star DECKS & FENCES (630) 449-2662

NAPERVILLE, IL & NEARBY SUBURBS

20-MILE SERVICE RADIUS

MOON'S EXTERIOR SERVICE

Deck Sanding in Naperville & Nearby Suburbs

Splinter & Rough Board Repair • Peeling Stain Removal • Railing & Stair Sanding • Stain Prep

GET MY FREE ESTIMATE NOW
  • New deck & fence builds
  • Repairs, staining & restoration
  • Same-week service available
  • Quality materials & clean, detailed work

TYPICAL PROJECT PRICING

Based on project scope, size & condition

Deck SandingWritten Price After Visit
Free On-Site EstimateWritten Price
Same-Week ServiceOften Available

Quality work. Clear estimates. No quick-fix solutions.

LIMITED SCHEDULING AVAILABLE — REQUEST YOUR FREE ESTIMATE TODAY.

Home › Deck Services › Deck Sanding

Splinters, rough patches and peeling stain make a deck look tired and hurt bare feet. Moon's Exterior Service does deck sanding in Naperville, IL and nearby suburbs to take the wood back to a smooth, clean surface so the new stain soaks in evenly and lasts. Searching for deck sanding near me? If you are within about 20 miles of Naperville, we can usually come out the same week.

When a deck needs sanding

  • Splinters and rough boards — raised grain that catches socks and bare feet
  • Peeling or flaking stain — old solid stain or paint that washing alone will not remove
  • Blotchy color — patches where old stain wore off and others where it did not
  • Fuzzy wood after washing — fibers lifted by water that need to be knocked down
  • Rough railings and handrails — the parts hands touch every day

Sanding the floor, railings and stairs

A deck is more than the floor. We sand the boards with the grain, then hand-sand the railings, spindles, handrails and stair treads — the parts people touch most. Edges and corners get finished by hand so the whole deck has the same smooth surface, not just the open areas a machine can reach.

Why sanding makes stain last longer

Stain needs open, clean wood to soak into. When old finish is left behind, new stain sits on top of it and starts peeling within a season. Sanding removes that weak layer and evens out the surface so the new coat goes on uniform. Most of our deck staining and deck restoration jobs combine power washing, sanding and staining for exactly this reason.

Our deck sanding process

  1. Clean. The deck is washed and fully dried first, so sanding does not grind dirt into the wood.
  2. Check and fix. We set popped nails and screws and mark boards that are too far gone to sand.
  3. Sand. Floor boards with the grain, then railings, spindles and stairs by hand.
  4. Clean up and finish. Dust is removed and the deck is ready for stain the same visit or the next dry day.

Sand or replace the board?

Sanding fixes the surface. It does not fix rot. If a board is soft, cracked deep or rotted, sanding will not save it — we replace it instead. See our deck board replacement service for boards that are past sanding.

GET MY FREE ESTIMATE

Deck Sanding near you

We provide deck sanding across Naperville and the suburbs within about 20 miles, including Naperville, Wheaton, Downers Grove, Hinsdale, Oak Brook, Glen Ellyn, Lisle, Woodridge, Elmhurst, Western Springs, Burr Ridge, Darien. See every town on our service areas page.

Related services

HOW IT WORKS

  1. 1

    Call or send the form

    Tell us what your deck or fence needs. We respond the same day.

  2. 2

    Free on-site estimate

    We come to your home, look at the project and give you a clear written price.

  3. 3

    We get it done

    Our crew does the work right, cleans up, and you enjoy your yard.

GET MY FREE ESTIMATE
Work done right — built to last, not quick fixes.
  • 15+ YEARS EXPERIENCE
  • SAME-WEEK SERVICE
  • 200+ DECKS & FENCES DONE
  • QUALITY MATERIALS
  • 5-STAR RATED
CALL (630) 449‑2662

DECK SANDING FAQ

How much does deck sanding cost?

It depends on the size of the deck, how many railings and stairs it has, and how much old finish has to come off. We look at the deck and give you a written price before we start.

Do you have to sand a deck before staining?

Not always. Decks with clean, sound wood may only need washing. Sanding is needed when the boards are rough, splintered or covered in peeling stain or paint.

Can sanding remove old solid stain or paint?

In most cases, yes. Sanding removes loose and peeling finish so the new stain can soak into the wood instead of sitting on top of the old coat.

Does sanding fix rotted boards?

No. Sanding only smooths the surface. Rotted or soft boards need to be replaced, which we can do on the same job.

How long does deck sanding take?

Most decks take one to two days for washing, drying and sanding, depending on the size and the weather.

THIS WEEK ONLY

NEW CUSTOMER SPECIAL

10% OFF YOUR FIRST SERVICE

Call or fill out the form below to claim your discount.

GET YOUR FREE ESTIMATE

We respond within the same day. No obligation, no pressure.

We respond the same day · (630) 449-2662

0/500

By submitting, you agree to be contacted about your project. We never sell or share your information. Privacy Policy